T-500 T-700 Temperature laboratory controllers

The controllers specially developed for demanding laboratory applications are the perfect partner for our Pilz laboratory heating mantles. With either a thermocouple or resistance sensor, the temperature can be measured directly in the medium and thus a very precise temperature accuracy can be achieved. The robust table-top housing enables simple and reliable operation in the laboratory.

T-500 provides temperature control of the heating mantle using the built-in heating mantle sensor or alternatively via medium sensor. Using the heating mantle sensor prevents the temperature of the glass flask from becoming too high and from overheating at the edges of the flask . Alternatively, the medium sensor can provide a more exact temperature of the medium inside the flask. The T-500 series offers two models.

✅ T-560 for direct connection to Pilz Heating Mantles. 3+PE socket that perfectly matches the pin wiring of PILZ heating mantles plug connection. Either the heating mantle sensor or medium sensor can be connected. Delivery includes miniature plug for connection of the sensor. The connection cable for power supply is already included with the heating mantle or can be ordered separately.

✅ T-570 for Schuko socket for connection of other products that do not have or use integraged Winkler standard 3+PE plugs or 6+PE sockets. For example, Winkler heating tapes and cables with Schuko plug or heating mantles from other manufacturers. Other sockets enable the simultaneaous use of two sensors. Delivery includes Schuko plug with cold appliance plug C14 and miniature plug for connection of the sensor.

T-700 combines both advantages of control with two sensors. The medium temperature is regulated with high precision using the medium sensor. An additional sensor in the heating mantle is used to limit the temperature of the heating mantle during heating. This prevents the temperature of the glass flask from becoming too high and the medium from overheating on the inner flask surface. In addition, the T-700 allows advanced functions such as slow heating via ramp temperature settings. The T-500 series offers three models.

✅ T-760 for direct connection to Pilz Heating Mantles. 3+PE socket that perfectly matches the pin wiring of PILZ heating mantles plug connection. Other sockets enable the simultaneous use of two sensors. Delivery includes miniature plug for connection of the sensor. Delivery does not include connection cable for power supply. This is already included with the heating mantle or can be ordered separately.

✅ T-770 for use with a variety of heating products that have a Schuko plug. Schuko socket for connection of other products that do not have or use intergraded Winkler standard 3+PE plugs or 6+PE sockets.For example Winkler heating tapes and cables with Schuko plug or heating mantles from other manufacturers. Other sockets enable the simultaneous use of two sensors. Delivery includes Schuko plug with cold appliance plug C14 and miniature plug for connection of the sensor.

✅ T-730 fordirect connection to other Winkler products with combined power and sensor coupling. 6+PE plug for connection of other heating products with 6+PE sockets. For example, Winkler heating mats and jackets using two sensors at the same time. Delivery includes miniature plug for connection of the sensor. Delivery does not include connection cable for power supply.This is already included with the heating mantle or can be ordered separately.